This is a general purpose printed circuit board that can be used for several of our DIY projects. The 2.250" x 2.250" board is designed to fit a Polycase LP-11F enclosure. Bare bus bar wire (Mouser 566-8023) and insulated solid hook-up wire are used for interconnections. The board is designed for the components listed below.

Manufacturer	Part Number	Description
Kycon	GMX-SMT2-N-64	6P4C Modular Jack
Kycon	GMX-SMT2-N-66	6P6C Modular Jack
Kobiconn	163-0179-EX	2.1mm Power Plug
Kobiconn	161-3335-E	3.5mm Stereo Jack

Several DIY projects consist of an RF receiver module and a PIC16F88. The PIC16F88 can use Tiny PIC Bootloader allowing for its firmware to be updated via RS232. This makes for a one-size-fits-all approach as the user can perform a personality transplant by merely downloading the appropriate firmware and tuning or replacing the RF receiver module.

_{Copyright: No part may be reproduced except as authorized by written permission. This restriction extends to reproduction in all media.}