enclosure

Item Details: roZetta™ Enclosure

Printed and machined Polycase LP51P enclosures are designed with knockouts (in red) for the ConnectOne Nano LANReach ethernet module, the IR Receiver and the BNC connector.

Boards originally designed for the Tibbo EM202 NetModule need to be notched, as illustrated below, to accommodate the ConnectOne Nano LANReach module mounted beneath the main board. The only critical dimension is the 17mm depth - it, along with the opening in the enclosure for the RJ45 jack, holds the module in place. The adapter board connects to six points on the ethernet module and six flexible leads connect between the adapter and the six points (circled in yellow) on the roZetta™ circuit board.

_{Copyright: No part may be reproduced except as authorized by written permission. This restriction extends to reproduction in all media.}